~ Basic Application

Sand your work perfectly to at least 400 grit;

1. Shake bottle before use;
2. Apply at least two coats using cloth, paper
   towel, brush or airbrush or other media
   allowing to dry thoroughly between coats;
3. (Optional) Apply your Oil and allow to cure;
4. Seal the wood an appropriate sealer, and
   allow to dry thoroughly;
5. Lightly cut the sealer back;
6. Apply your preferred finish.

~ Uses

Use for the blackening of decorative woodturning and other woodwork items.

~ Colour and Aroma

Waterbased colour dyes. Various colours in the bottle. No noticeable aroma.

~ Container

Supplied in a recycled 125ml boston bottles, presented in a sealed black cardboard box.

~ Storage

Store in a cool, dry place ideally between 10° and 30°C (50° and 90°F) Where possible. Protect from extreme heat and from freezing. Keep out of direct sunlight.

~ Longevity – Use By

Kept according to instructions, you can expect the product to last indefinitely.

~ Food Contact and Toy Safe?

Unknown – product has not been tested.

~ Product Label Warning

DANGER. May cause drowsiness or dizziness; Harmful to aquatic life with long lasting effects Ground and bond container and receiving equipment. Avoid breathing vapour/spray. Use only outdoors or in a well-ventilated area. Avoid release to the environment. Wear protective gloves/protective clothing/eye protection/face protection. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTRE/doctor if you feel unwell. In case of fire: Use foam, carbon dioxide, dry powder or water fog to extinguish. Collect spillage. Store in a well-ventilated place. Keep container tightly closed. Store in a well-ventilated place. Keep cool. Store locked up. Dispose of contents/ container in accordance with national regulations.

~ Product Warning Symbols

Product warning symbols are displayed on products to highlight the potential dangers of some of the contents of the products – this is usually the solvents. In many cases, once the solvent has evaporated, the warnings are irrelevant.